Ultra Supply Co logo
Ultra Supply Co logo

banner image
Track order

FAQs

Resizing Metal Bands

How to Resize Grade 2 Titanium Band

Step 1: Check arrows for the direction to push out pins


Step 2: Use tool and turn screw until pin is released


Step 3: Remove Pin, separate links. Repeat removing links to size as necessary


Step 4: Re-assemble Links in Reverse order


Step 5: Use back of tool to push pin in completely 

Installing Band on Apple Watch

Open clasp of band, insert one side into watch only halfway


Move to other side of the band, insert it halfway and then push both at the same time


Step 1: Check arrow direction

Step 2:  Use tool to push pin out

Step 3: Remove pin and link. Repeat on as many links necessary for good fit

Step 4: After removing links, re-assemble. *Note: pin goes in with larger side facing out

Step 5: Use back of tool to press pin in completely flush

How to Mount band on Apple Watch

Step 1: Insert one side halfway in

Step 2: Insert other side, halfway in 

Step 3: Push both sides in at the same time


Step 1: Insert Pin tool on one side of link hole


Step 2: Push and pull, wiggle link until pin is release


Step 3: Use pin tool on opposite side of link to fully release


Step 4: Pull links apart, repeat as necessary for proper size of wrist


Step 5: Re-assemble links, using pin tool to press down on spring bar to re-insert

Installing Band on Apple Watch

Step 1: Insert band on one side, halfway in

Step 2: Insert band on opposite side, halfway in 

Step 3: Push both sides in at the same time

Installing Metal Bands

Here's how to properly mount and attach your new metal band on your Apple Watch Ultra. This is applicable to all of our metal bands including the Titanium Band, Grade 2 Titanium Band and Link bracelet.

Step 1: Insert one side half way

Step 2: Insert other side half way

Step 3: Push both sides in at the same time


Get support